Wrangler 2WD V6-3.8L (2008)
1. Install the load floor carpet (2).
2. Install the rear speaker, See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and Repair/Installation.
3. Install the rear seat, See: Seats/Service and Repair/Seat - Installation.
4. Position the cover (1) tabs into the floor slots fully and close the cover.
Removal
REMOVAL
1. Remove the upper A-pillar trim (2), See: Pillar Trim/A-Pillar Trim Panel-Removal.
2. Using a trim stick C-4755 or equivalent, separate the retaining clips (1) and (2) and remove the windshield molding (3).
Installation
INSTALLATION
