Wrangler 2WD V6-3.8L (2008)
12.
Remove the screw used to attach the front side bow to the side bow knuckle (Fig. 4).
13.
Replace the front side bow that is between the header and knuckle.
14.
With the new replacement front side bow in place on the knuckle and header panel, install the front side bow to knuckle attaching screw.
15.
Install the two screws used to secure the new front side bow to the header panel.
16.
Install the four (4) screws used to secure the new front side bow to the inboard and outboard sides of the soft top header panel.