Wrangler 2WD V6-3.8L (2008)
3.
Inspect the windshield header seal molded details to ensure that the dark gray foam is present and not damaged. The dark gray foam is located at
each outer end of the windshield header seal. If the dark gray foam is damaged, remove the old foam and replace with new dark gray foam from
the Replacement Foam Repair Kit (Fig. 1).
NOTE:
The Replacement Foam Repair Kit includes all foam pieces for the vehicle. Not all foam pieces in the kit will be required for this Repair Procedure.
4.
Obtain the black foam piece from the Replacement Foam Repair Kit. The black foam pieces are handed (one for the left side and one the right
side). Select the correct side black foam piece.