Wrangler 2WD V6-3.8L (2008)
Seat Back: Service and Repair
Seat Back Cushion / Cover - Removal
Front
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Restraint Systems/Service Precautions
2. For appropriate seat configuration illustrations, See: Description and Operation.
3. Remove the front seat, See: Service and Repair/Seat - Removal.
4. Remove the seat recliner easy entry levers, if equipped.
5. Position aside the seat back cover and remove the seat back assembly bolts.
6. If equipped, disconnect the electrical connectors and remove the seat back.
7. Push in the buttons on both headrest sleeves, pull the headrest up and remove.
8. Separate the J-straps (1 & 2) and pull cover up over frame.
9. Unzip the cover zippers.
10. On vehicles equipped with seat air bags, remove the air bag, See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Seat Airbag/Removal.
