Wrangler 2WD V6-3.8L (2008)
11. Cut off the hog rings (2) attaching the cover (3) to the cushion (1).
12. Squeeze the locking tab (3) and remove the headrest sleeves (1) and remove the cover.
Rear
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Restraint Systems/Service Precautions.
2. For appropriate seat configuration illustrations, See: Description and Operation.
3. Remove the rear seat, See: Service and Repair/Seat - Removal.
4. Remove the headrest, See: Head Rest/Service and Repair/Headrest - Removal.
Two Door
1. Remove the back frame to cushion bolts and separate the seat back assembly.
2. Separate the J-straps and unzip the cover.