Wrangler 2WD V6-3.8L (2008)
3. Squeeze the locking tab (3) and remove the headrest sleeves (1).
4. Remove the seat cushion from the seat back frame.
5. Remove the hog rings and separate the cover from the cushion.
Four Door
1. Separate the seat halves.
2. Remove the seat handle bezel.
3. Remove the screws and remove the release handle.
4. Remove the seat cushion pivot bolts and remove the seat cushion from the seat back assembly.
5. Remove the inner and outer latch covers.
6. Remove the seat belt bezel.
7. Separate the J-straps and unzip the cover.
8. Remove the seat cushion from the seat back frame.
9. Remove the hog rings and separate the cover from the cushion.