Wrangler 2WD V6-3.8L (2008)
Seat Cushion: Service and Repair
Seat Cushion / Cover - Removal
Front
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Restraint Systems/Service Precautions
2. For appropriate seat configuration illustrations, See: Description and Operation.
3. Remove the front seat, See: Service and Repair/Seat - Removal.
4. Remove the lift handle, if equipped.
5. Separate the J-straps from the seat cushion frame and remove the seat cushion and cover.
6. Remove the hog rings and separate the cover from the cushion.
Rear
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Restraint Systems/Service Precautions.
2. For appropriate seat configuration illustrations, See: Description and Operation.
3. Remove the rear seat, See: Service and Repair/Seat - Removal.
Two Door
1. Remove the seat back frame to seat cushion assembly bolts and separate the seat back assembly.
2. Separate the J-straps and remove the cover and cushion assembly.
3. Remove the hog rings and separate the cushion and cover.
Four Door
1. Separate the rear seat sections.
2. Remove the seat cushion pivot bolts and separate the cushion from the back assembly.
3. Release the J-straps and separate the cushion assembly from the frame.
4. Remove the hog rings and separate the cover from the cushion.