Wrangler 2WD V6-3.8L (2008)
3.
Verify Freedom Top has been updated with all of the proper foam and butyl parts as shown in SB # 23-020-08 Dated June 20, 2008. (Fig 2) shows
placement of these components.
If SB # 23-020-08 has not been completed and leaks are occurring at the windshield header, the Freedom Tops will require resealing in conjunction with
the header seal replacement. Perform SB # 23-020-08 before proceeding with this bulletin.
NOTE:Vehicles equipped with Dual Tops (Soft and Freedom Top) should have this bulletin performed with the Freedom Top installed. The replacement
header seal may initially cause a soft top wind noise.
