Wrangler 2WD V6-3.8L (2008)
11. Remove the bolts at the five locations shown (3) that secure the A/C condenser (1) to the radiator.
12. If equipped with an automatic transmission, separate the A/C condenser from the radiator.
13. If equipped with a manual transmission, remove the two bolts that secure the radiator to the upper radiator support and carefully push the top of
the radiator rearward to provide clearance for the refrigerant line tapping block (2), then lift the A/C condenser out from the front of the engine
compartment.
14. If required and equipped with an automatic transmission, remove the bolt (4) that secures the transmission cooler line adapter (5) to the left side of
the automatic transmission fluid cooler (6).
15. If required, remove the A/C receiver/drier (7) from the right side of the A/C condenser See: Receiver Dryer/Service and Repair/Removal.
