Wrangler 2WD V6-3.8L (2008)
2. Push the bulb straight into the socket until the base is firmly seated.
3. Rotate the bulb clockwise about 30 degrees to lock it into place.
4. Align the socket and bulb with the opening near the bottom of the headlamp unit housing (1).
5. Push the socket and bulb straight into the rubber grommet in the housing until the socket is firmly seated.
6. Reinstall the headlamp unit into the mounting collar (3). See: Service and Repair/Removal and Replacement/Front Lamp Unit - Installation.
7. Reconnect the battery negative cable.
