Wrangler 2WD V6-3.8L (2008)
License Plate Bulb: Service and Repair
Removal
BULB
1. Disconnect and isolate the battery negative cable.
2. Reach under the license plate lamp hood (1) to access and squeeze together the two latch tabs (4) integral to license plate lamp lens (3).
3. Pull the lens downward and back out of the hood far enough to access the bulb socket (2).
4. Firmly grasp the bulb socket on the back of the lens and rotate it counterclockwise about 30 degrees to unlock it.
5. Pull the socket and bulb straight out from the keyed opening in the lens.
6. Firmly grasp and pull the bulb straight out of the socket.
