Wrangler 2WD V6-3.8L (2008)
Alignment: Description and Operation
Operation
OPERATION
-
CASTER is the forward or rearward tilt of the steering knuckle from vertical. Tilting the top of the knuckle rearward provides positive caster.
Tilting the top of the knuckle forward provides negative caster. Caster is a directional stability angle. This angle enables the front wheels to return
to a straight ahead position after turns
-
CAMBER is the inward or outward tilt of the wheel relative to the center of the vehicle. Tilting the top of the wheel inward provides negative
camber. Tilting the top of the wheel outward provides positive camber. Incorrect camber will cause wear on the inside or outside edge of the tire.
The angle is not adjustable, damaged component(s) must be replaced to correct the camber angle
-
WHEEL TOE POSITION is the difference between the leading inside edges and trailing inside edges of the front tires. Incorrect wheel toe
position is the most common cause of unstable steering and uneven tire wear. The wheel toe position is the final front wheel alignment adjustment
-
STEERING AXIS INCLINATION ANGLE is measured in degrees and is the angle that the steering knuckles are tilted. The inclination angle
has a fixed relationship with the camber angle. It will not change except when a spindle or ball stud is damaged or bent. The angle is not
adjustable, damaged component(s) must be replaced to correct the steering axis inclination angle
-
THRUST ANGLE is the angle of the rear axle relative to the centerline of the vehicle. Incorrect thrust angle can cause off-center steering and
excessive tire wear. This angle is not adjustable, damaged component(s) must be replaced to correct the thrust angle
