Wrangler 2WD V6-3.8L (2008)
Wheel Bearing: Service and Repair
Front Hub / Bearing - Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.Support the caliper, Do not let the caliper hang by the hose.
3. Remove the disc brake caliper (1) See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and
Replacement/Disc Brake Caliper.
4. Remove the brake caliper adaptor (1) See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and
Replacement/Disc Brake Caliper Adapter.
5. Remove the disc brake rotor (3) See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement.
6. Remove the wheel speed sensor bolt (2).