Jeep Workshop Service and Repair Manuals > Wrangler 2WD V6-3.8L (2008) > Powertrain Management | Emission Control Systems | Exhaust Gas Recirculation | EGR Valve | Component Information | Service and Repair | Removal

Page 3

5. Remove tube mounting bolt (2).

6. Remove two tube mounting bolts (1) at EGR valve end of tube.
7. Remove and discard gasket (5) and O-ring (3).

8. Remove two EGR valve mounting bolts (3).
9. Discard gasket (2).

Jeep Workshop Service and Repair Manuals