jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Seat Belt and Retractor - Removal|Page 7521 > < Seat Belt and Retractor - Removal|Page 7519
Page 5
background image

NOTE: The anchor plates for the right second row seat belt buckle (7) and the second row center seat belt anchor (6) are secured to each other
by a soft metal grommet as an assembly aid during the manufacturing process and, once removed, the grommet does not require reinstallation.

1. Remove the right second row seat belt buckle (7) and center seat belt lower anchor unit (6) from the rear floor panel and separate them from each

other. See: Seat Belt Buckle/Service and Repair/Seat Belt Buckle - Removal

2. Remove the second row seat from the vehicle as a unit and place it on a suitable work surface. Be certain to take the proper precautions to prevent

the trim cover from receiving cosmetic damage during the following procedures. See: Body and Frame/Seats/Service and Repair/Seat - Removal.

3. Remove the bezel (4), trim cover (3) and foam from the 60 percent seat back panel (2). .
4. Disengage the retractor locking cable housing (9) and cable end (8) from the right outboard seat back latch mechanism.
5. Remove the screw (1) that secures the second row center seat belt retractor (5) to the seat back panel.
6. Remove the second row center seat belt and retractor unit from the seat back panel.

Second Row Outboard - Four Door

SECOND ROW OUTBOARD - FOUR DOOR

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut,
frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or
retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the
anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or
ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler
Mopar(R) Parts Catalog.

NOTE: All seat belt retractors except the driver side front retractor include a switchable automatic locking mechanism. See: Seat Belt
Retractor/Description and Operation/Description.

Seat Belt and Retractor - Removal|Page 7521 > < Seat Belt and Retractor - Removal|Page 7519