Wrangler 2WD V6-3.8L (2008)
1. Thread decoupler pulley onto generator shaft by hand (right-hand threads).
2. Position Special Tool 8433 into decoupler. Align tool to hex end of generator shaft.
3. Do not use an adjustable, ratcheting "click type" torque wrench. Most "click type" wrenches will only allow torque to be applied in a
clockwise rotation. Use a dial-type or beam-type wrench. Tighten in direction as shown. Refer to torque specifications.
4. Install accessory drive belt, and generator.
5. Connect negative battery cable.
