Wrangler 2WD V6-3.8L (2008)
6. Remove the support and lower the vehicle.
7. Align the column coupler shaft (1) to steering gear (2). Install a new coupler pinch bolt and tighten to 49 Nm (36 ft. lbs.).
8. Install power steering hoses/tubes (1&2) to steering gear (3) and tighten to 36 Nm (27 ft. lbs.).
9. Reinstall the coolant bottle back into position.
10. Fill power steering system to proper level, See: Power Steering/Power Steering Bleeding/Service and Repair.
11. Check the toe setting, See: Alignment/Service and Repair.