jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Torque Converter Clutch Solenoid, A/T > < Shift Solenoid, A/T|Removal

Wrangler 2WD V6-3.8L (2008)

Page 1
background image

Shift Solenoid: Service and Repair
Installation

INSTALLATION

NOTE: If the Solenoid/Pressure Switch assembly is being replaced, the Quick Learn Procedure must be performed. See: Transmission Control
Systems/Testing and Inspection/Programming and Relearning/TCM Quick Learn

1. Install Solenoid/Pressure Switch Assembly (1) and screen (3) to the separator and transfer plates.

2. Install and tighten retaining screws (2) to 5.5 Nm (50 in. lbs.) torque.
3. Install valve body. See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and Replacement/Installation

Torque Converter Clutch Solenoid, A/T > < Shift Solenoid, A/T|Removal