Wrangler 2WD V6-3.8L (2008)
Shift Solenoid: Service and Repair
Removal
REMOVAL
NOTE: If the Solenoid/Pressure Switch Assembly is being replaced, the Quick Learn Procedure must be performed. See: Transmission Control
Systems/Testing and Inspection/Programming and Relearning/TCM Quick Learn
1. Raise vehicle on hoist.
2. Remove valve body assembly from transmission. See: Valve Body/Service and Repair/Removal and Replacement/Removal
3. Remove Solenoid/Pressure Switch Assembly retaining screws (2) from solenoid.
4. Remove Solenoid/Pressure Switch Assembly (1) and screen from valve body (2).