jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Transmission Control System Relay, A/T > < Torque Converter Clutch Solenoid, A/T|Removal

Wrangler 2WD V6-3.8L (2008)

Page 1
background image

Torque Converter Clutch Solenoid: Service and Repair
Installation

INSTALLATION

NOTE: If the Solenoid/Pressure Switch assembly is being replaced, the Quick Learn Procedure must be performed. See: Transmission Control
Systems/Testing and Inspection/Programming and Relearning/TCM Quick Learn

1. Install Solenoid/Pressure Switch Assembly (1) and screen (3) to the separator and transfer plates.

2. Install and tighten retaining screws (2) to 5.5 Nm (50 in. lbs.) torque.
3. Install valve body. See: Valve Body/Service and Repair/Removal and Replacement/Installation

Transmission Control System Relay, A/T > < Torque Converter Clutch Solenoid, A/T|Removal