Wrangler 2WD V6-3.8L (2008)
8. If pinion rotating torque is low. Hold pinion flange with Spanner Wrench 6958 and tighten pinion nut in 6.8 Nm (5 ft. lbs.) increments until pinion
torque to rotating is achieved.
CAUTION: If maximum tightening torque of 271 Nm (200 ft. lbs.) is reached before torque to rotate is achieved, the collapsible spacer
may have been damaged. Never loosen pinion gear nut to decrease pinion gear bearing rotating torque and never exceed specified
preload torque. Failure to follow these instruction may result in damage.
9. Install propeller shaft.
10. Install brake components.