Wrangler 2WD V6-3.8L (2008)
NOTE:
Due to the CCN programming procedure, DTC(s) may be set in other modules (TCM, ABS, BCM, MIC, WCM, etc.) within the vehicle, if so
equipped. Some DTC's may cause the MIL to illuminate.
a. From the "Home" screen select "System View".
b. Select "All DTCs".
c. Press "Clear All Stored DTCs" if there are any DTCs shown on the list.
11. Turn the ignition key to the "OFF" position and remove the StarMOBILE unit, StarMOBILE vehicle cable, and battery charger from the vehicle.
