Jeep Workshop Service and Repair Manuals > Wrangler 2WD V6-3.8L (2008) > Transmission and Drivetrain | Sensors and Switches - Transmission and Drivetrain | Sensors and Switches - A/T | Transmission Position Switch/Sensor, A/T | Component Information | Service and Repair

Page 1

Transmission Position Switch/Sensor: Service and Repair
Removal

REMOVAL

1. Remove valve body assembly from vehicle.See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and

Replacement/Removal

2. Remove the manual shaft seal (1).

3. Remove manual shaft/TRS retaining screw (1).
4. Slide TRS off of manual valve shaft.

Jeep Workshop Service and Repair Manuals