Wrangler 2WD V6-3.8L (2008)
Windshield Washer Spray Nozzle: Description and Operation
Description
Front
FRONT
The fluidic front washer nozzle (1) is constructed of molded plastic and has in integral latch feature (2) that secures it in a dedicated mounting hole
located at the center, rear edge of the hood panel near the windshield. The domed upper surface of the washer nozzle is visible on the outside of the hood
panel, and the nozzle orifice (4) is oriented towards the windshield glass.
The washer plumbing fitting (3) for the washer nozzle extends below the hood panel and is accessible from the engine compartment.
The front washer nozzle cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced.
Rear
REAR
The fluidic rear washer nozzle (2) is constructed of molded plastic with an integral metal orifice insert (3). The rear washer nozzle is integral to the rear
wiper motor output shaft and is visible through a cutout in the rear wiper arm nut cover (1) on the upper left corner of the outer rear lift glass. The nozzle
orifice is oriented toward the lower path of the rear wiper blade on the lift glass and moves in concert with the rear wiper motor output shaft and the rear
wiper arm.
