Wrangler 2WD V6-3.8L (2008)
Wiper Blade: Service and Repair
Wiper Blades - Rear Wiper Element Replacement
REAR WIPER ELEMENT REPLACEMENT
1. Remove the rear wiper blade (3) from the wiper arm. See: Wiper Blades - Removal.
2. Grasp one of the wiper blade links (4) firmly with one hand, and grasp the wiper element (1) and flexors (2) midway between the two links with
the other hand.
3. Pull the element and flexor away from the blade far enough to disengage them from the end pair of claws (5) of one link.
4. Slide the element and flexor toward the loose end to disengage them from the remaining sets of claws.
5. Reverse this process to install a new element and flexors into the wiper blade.
6. Reinstall the wiper blade onto the wiper arm. See: Wiper Blades - Installation.