Wrangler 2WD V6-3.8L (2008)
9. Install the rubber seal (2) and the plastic spacer (3) over the rear wiper motor output shaft (1).
10. Install and tighten the nut (4) that secures the output shaft to the lift glass. Tighten the nut to 4 Nm (35 in. lbs.).
11. Install the plastic nut cover (5) over the output shaft.
12. Reinstall the rear wiper arm onto the output shaft. See: Wiper Arm/Service and Repair/Wiper Arms - Installation.
13. Reconnect the battery negative cable.
