Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Glove Compartment Lock: Service and Repair
Glove Box Latch Striker Replacement
REMOVAL
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAGS BEFORE ATTEMPTING ANY STEERING WHEEL,
STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER
PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
1. Remove the glove box from the instrument panel. See: Service and Repair/Glove Box Component Replacement
Glove Box Latch Striker Remove/Install
2. Remove the two screws that secure the glove box latch striker to the grab handle bezel at the top of the glove box opening.
3. Remove the latch striker from the instrument panel.
4. Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N.m (20 in. lbs.).
