Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
1. Install mounting bracket on HCU and tighten to 6.5 Nm (57 in. lbs.).
2. Install HCU and tighten mounting bolts to 9 - 13 (80 - 115 in. lbs.).
3. Align and start brake line fittings by hand to avoid cross threading.
4. Tighten brake lines to 15 - 18 Nm (130 - 160 in. lbs.).
5. Connect HCU harness.
6. Connect negative battery terminal.
7. Bleed complete brake system.
