Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Wheel Cylinder: Service and Repair
Wheel Cylinder Removal and Installation
REMOVAL
1. Remove wheel and tire assembly.
2. Remove brake drum.
3. Remove wheel cylinder brake line.
4. Remove brake shoe return springs and move shoes out of engagement with cylinder push rods.
5. Remove cylinder attaching bolts and remove cylinder from support plate.
INSTALLATION
1. Apply bead of silicone sealer around cylinder mounting surface of support plate.
2. Install cylinder mounting bolts and tighten to 10 Nm (7 ft. lbs.).
3. Install brake line to cylinder and tighten to 16 Nm (12 ft. lbs.).
4. Install brake shoe return spring.
5. Install brake drum.
6. Install wheel and tire assembly.
7. Bleed base brake system.