Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
HYDRAULIC CONTROL UNIT
Removal
1. Disconnect and isolate the negative battery terminal.
2. Disconnect the Hydraulic Control Unit (HCU) harness connectors.
Fig. 6
3. Remove all the brake lines from the HCU.
HCU Mounting
4. Remove HCU mounting bolts and remove HCU.
5. Remove bolts from mount and remove mount from HCU.
Installation