Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Engine Mount: Service and Repair
Front Mount
The front mounts support the engine at each side. These supports are made of resilient rubber.
REMOVAL
1. Disconnect negative cable from battery.
2. Raise the vehicle.
3. Support the engine.
Left Front Mount-2.5L Engine
Right Front Mount 2.5L Engine
4. Remove through bolt nut. DO NOT remove the through bolt.
5. Remove the retaining bolts and nuts from the support cushions.
6. Remove the through bolt.
