Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Engine Mount: Service and Repair
Rear Mount
A resilient rubber cushion supports the transmission at the rear between the transmission extension housing and the rear support crossmember or skid
plate.
REMOVAL
All Transmissions
1. Disconnect negative cable from battery.
2. Raise the vehicle and support the transmission.
Rear Mount (Manual Transmission)
Rear Mount (Automatic Transmission)
3. Remove the nuts holding the support cushion to the skid plate.
4. Remove the skid plate bolts and the skid plate.
Manual Transmissions
1. Remove nuts holding support cushion to transmission support bracket.