Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Evaporator Core: Service and Repair
REMOVAL
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAGS BEFORE ATTEMPTING ANY STEERING WHEEL,
STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER
PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
1. Remove and disassemble the heater-A/C housing. See Heater-A/C Housing for the procedures. See: Housing Assembly HVAC/Service and
Repair
Evaporator Coil Remove/Install
2. Lift the evaporator coil unit out of the lower half of the heater-A/C housing.
3. Reverse the removal procedures to install. Be certain that the evaporator foam insulator wrap and rubber tube seal are reinstalled.
NOTE: If the evaporator is replaced, add 60 milliliters (2 fluid ounces) of refrigerant oil to the refrigerant system.