Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Instrument Panel Bulb: Service and Repair
REMOVAL
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAGS BEFORE ATTEMPTING ANY STEERING WHEEL,
STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER
PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
1. Remove the instrument cluster from the instrument panel. See Instrument Cluster for the procedures.
Cluster Bulb Locations
2. Remove the bulb and bulb holder from the circuit board on the rear of the instrument cluster housing by turning the holder counterclockwise.
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the
instrument cluster printed circuit and/or the gauges.
3. Reverse the removal procedures to install.
