Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Dome Lamp Bulb: Service and Repair
Cargo Area Dome Lamp Bulb
REMOVAL
Cargo Area Dome Lamp
1. Remove the dome/cargo lamp lens by squeezing it at the lens at the top and bottom. This will separate the lens retaining tabs from the lamp
housing shoulders.
2. Remove the lens from the lamp housing.
3. Pull the bulb straight out to remove from the bulb holder.
INSTALLATION
1. Insert the replacement bulb in the bulb holder.
2. Position lens at the lamp housing and press into the housing until the retainer tabs are seated.
