Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Turn Signal Bulb: Service and Repair
Tail/Turn Signal/Back-Up Lamp Bulb
REMOVAL
Lens Removal
1. Remove the screws attaching the lens to the tail lamp housing.
2. Separate the lens from the tail lamp housing.
3. Push the bulb inward and rotate counter-clockwise.
4. Remove the bulb from the lamp socket.
INSTALLATION
1. Install a replacement bulb in the lamp socket.
2. Position the lens on the lamp housing.
3. Install the screws. Tighten the screws securely.