Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
1.
Peel the weatherstrip from the channel.
2.
Remove the push-in fasteners attaching the weatherstrip to the door (Fig. 2).
3.
Position the lower part of the new weatherstrip and seat the push-in fasteners fully.
4.
Install the weatherstrip in the upper weatherstrip channel seat fully.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
