Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Automatic Shut Down (ASD) Relay: Service and Repair
PDC Location
The ASD relay is located in the Power Distribution Center (PDC). Relay location is printed on a label on PDC cover.
REMOVAL
1. Remove the PDC cover.
2. Remove the relay by lifting straight up.
INSTALLATION
1. Check condition of relay terminals at PDC for corrosion or damage. Also check the heights of relay terminal pins at PDC. Pin height should be
same for all pins. Repair as necessary before installing relay
2. Push the relay into the connector.
3. Install the relay cover.
