Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Fuel Injector: Testing and Inspection
Fig. 7 Fuel Injector Internal Components-Typical
FUEL INJECTOR TEST
To perform a complete test of the fuel injectors and their circuitry, refer to appropriate Powertrain Diagnostics Procedures. To test the injector
only, refer to the following:
Disconnect the fuel injector wire harness connector from the injector. Place an ohmmeter across the injector electrical terminals. Resistance
reading should be approximately 12 ohms +/- 1.2 ohms at 20°C (68°F).
