Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Spark Plug: Procedures
Plug Cleaning
The plugs may be cleaned using commercially available spark plug cleaning equipment. After cleaning, file the center electrode flat with a small point
file or jewelers file before adjusting gap.
CAUTION: Never use a motorized wire wheel brush to clean the spark plugs. Metallic deposits will remain on the spark plug insulator and will cause
plug misfire.
Plug Gap Adjustment
Setting Spark Plug Gap-Typical
Check the spark plug gap with a gap gauge tool. If the gap is not correct, adjust it by bending the ground electrode. Never attempt to adjust the
gap by bending the center electrode.
Spark Plug Gap = 0.89 mm (0.035 in).