Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Rear Band Ajustment Screw Location
4. Tighten adjusting screw to 5 Nm (41 inch lbs.) for the 30RH and 8 Nm (72 inch lbs.) torque for the 32RH.
5. Back off adjusting screw 7 turns for the 30RH and 4 turns for the 32RH.
6. Hold adjusting screw in place and tighten locknut to 34 Nm (25 ft. lbs.) torque.
7. Position new gasket on oil pan and install pan on transmission. Tighten pan bolts to 17 Nm (13 ft. lbs.) torque.
8. Lower vehicle and refill transmission with MOPAR ATF+4, Type 9602, fluid.
