Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Clutch Pedal Assembly: Service and Repair
REMOVAL
1. Remove steering column lower cover and knee blocker for access.
2. Disconnect clutch pedal position switch wires.
Clutch Pedal Mounting
Clutch Pedal Mounting-Right Hand Drive
3. Disengage captured bushing lock tabs attaching clutch master cylinder actuator to pedal pivot.
4. Remove nuts attaching pedal and bracket to dash panel and upper cowl support.
5. Separate pedal assemble from vehicle.
INSTALLATION
Clutch Pedal Mounting
