Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Seat Pinion Gear Side Differential Dummy Side Bearing
Seat Ring Gear Side Differential Dummy Side Bearing
7. Using a dead-blow type mallet, seat the differential dummy bearings to each side of the axle housing.
Differential Side Play Measurement
8. Thread guide stud C-3288-B into rear cover bolt hole below ring gear.
9. Attach a dial indicator C-3339 to guide stud. Position the dial indicator plunger on a flat surface between the ring gear bolt heads.
