Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Pinion Gear: Service and Repair
181 FBI Axle
The ring and pinion gears are serviced as a matched set. Do not replace the pinion gear without replacing the ring gear.
REMOVAL
1. Remove differential assembly from axle housing.
2. Mark pinion yoke and propeller shaft for installation alignment.
3. Disconnect propeller shaft from pinion yoke. Using suitable wire, tie propeller shaft to underbody.
Pinion Yoke Holder-Typical
4. Using Holder 6958 to the hold yoke, remove the pinion nut and washer.
Pinion Yoke Removal
5. Using Remover C-452 and Holder C-3281, remove the pinion yoke from pinion shaft.
