Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Press Out Bearing
5. Place a socket with an outside diameter smaller than the upper bearing cap on the upper bearing cap and partially press one bearing cap from the
outboard side of the link yoke enough to grasp the bearing cap with vise jaws. Be sure to remove grease fittings that interfere with removal.
Remove Bearing From Yoke
6. Grasp the protruding bearing by vise jaws. Tap the link yoke with a mallet and drift to dislodge the bearing cap from the yoke.
Remove Centering Kit