Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Seals and Gaskets: Service and Repair
Halfshaft U-Joint Type Axle Shaft
REMOVAL
1. Raise and support vehicle.
2. Remove differential assembly.
3. Remove the inner axle shaft seals with a pry bay.
INSTALLATION
1. Remove any sealer remaining from original seals.
2. Remove sealer from axle tube to housing junction, if necessary.
Fig. 33
3. Install oil seals with Discs 8110 and Turnbuckle 6797. Tighten tool until disc bottoms in housing.
4. Install differential assembly.
