Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Bell Housing: Service and Repair
CLUTCH HOUSING
The clutch housing is removable and can be replaced when the transmission is out of the vehicle.
Clutch Housing Attachment
The bolts attaching the housing to the transmission case are located inside the housing. Recommended tightening torque for the clutch housing
to-transmission bolts is 38 Nm (28 ft. lbs.).
NOTE: Be sure the transmission and housing mating surfaces are clean before installing an original, or replacement clutch housing. Dirt/foreign
material trapped between the housing and transmission will cause misalignment. If misalignment is severe enough, the result will be clutch drag,
incomplete release and hard shifting.
