Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Heated Glass Element Relay: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect and isolate the battery negative cable.
Power Distribution Center
2. Remove the cover from the Power Distribution Center PDC..
3. Refer to the label on the PDC for defogger relay identification and location.
4. Unplug the defogger relay from the PDC.
5. Install the defogger relay by aligning the relay terminals with the cavities in the PDC and pushing the relay firmly into place.
6. Install the PDC cover.
7. Connect the battery negative cable.
8. Test the relay operation.
