Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
6. Remove the accessory switch bezel from the instrument panel.
7. With a small thin-bladed screwdriver, gently pry the snap clips at the top and bottom of the rear wiper and washer switch receptacle on the back of
the accessory switch bezel and pull the switch out of the bezel.
8. Reverse the removal procedures to install. Be certain that both of the switch snap clip retainers in the receptacle on the back of the accessory
switch bezel are fully engaged. Tighten the mounting screws to 2.2 N.m (20 in. lbs.).
