Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Windshield Washer Reservoir: Description and Operation
SYSTEM OPERATION
A single washer fluid reservoir is used for both the front and rear washer systems. The washer fluid reservoir is secured to the inner fender shield,
over the left front wheel house in the engine compartment.
Each washer pump and motor unit has a barbed nipple, which is installed through a rubber grommet seal inserted in a hole near the bottom of the
reservoir. The washer pumps are retained by an interference fit between the barbed nipple and the grommet seal, which is a light press fit.
The washer reservoir has a snap-fit filler cap with a rubber gasket. The cap hinges on and is secured to a molded-in hook formation on the
reservoir behind the filler neck.
The washer reservoir and filler cap are each available for service.
